Free calculator
Enter the floor area, floors, walls and how many people use the WiFi. You get a range from the same model as our WiFi planner, with the working shown.
You need about
1 to 2
access points
Walls and floor area decide this, not the number of people.
One access point serves 85 m² to 210 m² here.
8 devices, 24 Mbps at the busiest time. One radio carries 50 devices or 320 Mbps.
The larger of the two.
No account, nothing to install. Your plan stays in your browser.
Why a range: the lower figure counts the access point’s own signal with doors open, which is what the editor shows. The higher one designs for a phone’s weaker signal back to the access point, through closed doors.
On your plan, the editor shows the signal in every room as you place access points, free for one floor. Automatic placement and the exact count for your own walls are in Pro.
Planning for a client? What Pro does for installersOne floor, 5 GHz, a family online at once. Find your size, then your walls.
| Floor area | Light | Mixed | Concrete |
|---|---|---|---|
| 75 m²800 sq ft | 1 | 1 | 1 to 2 |
| 110 m²1,200 sq ft | 1 | 1 to 2 | 1 to 2 |
| 160 m²1,700 sq ft | 1 | 1 to 2 | 2 to 3 |
| 230 m²2,500 sq ft | 1 to 2 | 2 to 3 | 2 to 4 |
| 350 m²3,800 sq ft | 1 to 3 | 2 to 5 | 3 to 6 |
Two floors? Use each floor’s own area and add the answers: every floor needs at least one access point.
One floor, 5 GHz, one person per 10 m², everyday use.
| Office | Light | Mixed | Concrete |
|---|---|---|---|
| 200 m²2,200 sq ft | 1 | 1 to 2 | 1 to 2 |
| 500 m²5,400 sq ft | 2 | 2 to 4 | 3 to 5 |
| 1,000 m²10,800 sq ft | 4 | 4 to 8 | 5 to 10 |
| 2,000 m²21,500 sq ft | 8 | 8 to 15 | 9 to 20 |
Where people sit closer, as in a training room, an event or a call centre, set the people and the use above: capacity often decides there.
Two questions, the same two the editor asks. Does the signal reach every room? That is coverage. Can the access points carry everyone at the busiest time? That is capacity. The answer is whichever needs more.
The formula
APs = max( floors × ⌈area per floor ÷ (cell × 0.6)⌉ , ⌈devices ÷ 50⌉ , ⌈Mbps ÷ radio Mbps⌉ )
Floor one access point serves
5 GHz, after overlap. Lower figure: designed for a phone, doors closed. Higher: the access point’s signal, doors open.
| Building | Light | Mixed | Concrete |
|---|---|---|---|
| Home | 170 to 425 m² | 85 to 210 m² | 60 to 150 m² |
| Office | 350 to 715 m² | 135 to 340 m² | 100 to 230 m² |
| Open hall | 905 to 1,660 m² | 430 to 615 m² | 150 to 410 m² |
We lay out a floor of rooms (4 m apart in a home, 6 m in an office, 12 m in a hall), give every wall your material with a 1 m doorway, put one access point in a room and let the editor’s engine measure where the signal stays at or above -67 dBm. That is the editor’s usable-signal line, good enough for video calls.
The lower end of the range uses the access point’s signal (20 dBm with a 3 dBi antenna, the editor’s default radio) with doors open. The higher end uses a phone’s signal back to the access point, about 14 dBm, through closed wooden doors. A connection needs both directions, and the phone is the weaker end.
Neighbouring cells overlap so devices can roam, and cells lose area at the building’s edges. So each access point is counted for 60% of its cell. That share is checked against the editor’s own automatic placement on the same floors, and a test keeps the two in step.
At least one access point per floor. A concrete slab blocks most of the signal; on your plan the editor shows when one access point can serve two floors.
Each person brings 2 devices (3 in dense use), at 3 Mbps each for everyday use and 5 Mbps for video calls. One radio carries 50 devices and about 320 Mbps on 5 GHz at 80 MHz (360 Mbps on 6 GHz, 40 Mbps on 2.4 GHz). These are the editor’s capacity figures.
What a calculator cannot know: the shape of your building, where a cable can reach, metal, lifts, mirrors and your neighbours’ networks. That is what the floor plan is for. The engine itself lands within about 6 to 10 dB of a measurement in a typical home or office.
How the prediction works, and its accuracy The full guide, with the link budget worked out
On one floor, at 5 GHz: 1 to 2 with light interior walls (drywall, timber), 1 to 3 with brick or block, 2 to 4 with concrete. On two floors, plan at least one per floor. Wall material moves the answer more than the size does.
About 500 m² with brick or block walls on one floor needs 2 to 4 for everyday use, and 2 to 4 when everyone is on video calls: at that size the walls decide. Put the same 50 people in a 150 m² training room and the load decides instead: 3.
It ignores the walls, which matter most. In a home, one access point serves 1,850 to 4,600 sq ft with light walls, 900 to 2,250 sq ft with brick or block and 650 to 1,650 sq ft with concrete. So the rule is cautious with light walls, about right for brick, and can fall short with concrete.
Usually yes. Every wall costs more at higher frequencies. A 160 m² home with brick or block walls needs 1 to 2 on 5 GHz and 1 to 3 on 6 GHz.
Because a connection runs both ways. The access point is louder than your phone, so its signal reaches further than the phone’s reply. The lower figure is what the access point covers with doors open; the higher one keeps a phone connected through closed doors. Your floor plan settles where in the range you are.
No. It needs a few numbers and runs in your browser; it sends only an anonymous count with rough size ranges. For exact positions, open your plan in the WiFi Heatmap editor (wifiheatmap.app): free, no account, and the plan never leaves your browser.